What does the Door error code on the Atlant washing machine mean: the hatch door is not tightly closed.
An electronic control washer displays a trouble code on the display. Electromechanical models Atlant without a screen recognize the Door error by the glow of 1, 3, 4 indicators.
We will search for the causes of the problem and figure out how to fix the damage with your own hands.
Reasons and Solutions
What do you mean Door error in the Atlant washing machine, you understand. The hatch door may not close due to problems with the electronics or with mechanical elements.
What to do:
- Check how the door closes, press the hatch closer.
- Inspect the handle lock, sunroof lock device. Check the wiring connecting them to the control module.
- Evaluate the performance of the control board.
Before you begin to correct the situation, try rebooting Atlant. Disconnect the SM for 10-20 minutes, then turn it on. If the Doo error goes away, then the cause was a system crash.
If the error reset failed, action must be taken.
How to fix electronics issues
SMA Atlant is equipped not only with a mechanical lock - for reliable protection the door is locked at an electronic level. The UBL castle is responsible for this.
How to determine that the reason is in UBL: the hatch closes normally, but the wash does not start. The Atlant will not start working until the hatch is locked at the electronic level. The error Door appears on the display.
The locking device works from electronic impulses - under their influence, the device plates expand, pressing on the lever. It happens that the plates wear out and the UBL requires replacement. But first, check the device for serviceability with a multimeter.
Inspect the lock hole for blockage. Perhaps clogged debris interferes with locking the lock. For cleaning, you need to disassemble the UBL.
If the Door error still lights up on the display, check the wires between the control unit and the UBL. There may be defects that need to be isolated or replaced.
Lastly, the module is checked: measure the resistance of the board elements with a multimeter. In case of breakdown, it is subject to repair. If the module is completely burnt out, install a new one.
Mechanical malfunctions
There are other reasons why the Atlant machine writes a Door error. To resolve the problem, check the following items:
How to replace the hatch handle yourself
If you figured out that the Atlant washing machine generates a Door error due to a mechanical nature, you need to replace the handle or its elements.
- Remove the door from the AGR by unscrewing the two mounting bolts.
- Lay the sunroof on a flat surface.
- Remove the bolts securing the two parts of the door.
- Unclench latches, remove an external part together with glass.
- If your goal is to put the tab back in place, adjust the pin that secures the handle.
- To replace the entire mechanism, push and pull the pin.
- Having disassembled the handle mechanism, install a new one.
- The spring is located first.
- Install the latch and, holding it, insert the pin.
- Put the handle on top and fasten the mechanism by pushing the pin.
The replacement will help you video:
Now you know what to do if the Atlant washing machine shows the Door error on the display.