The first launch of a new washing machine is an important undertaking. If the washing machine is not connected correctly, the equipment may break.
We will tell you about the first launch and help make the first inclusion simple and comfortable.
Instruction manual: what is important to know
The first thing after buying a washer is to read the instructions for it, and not immediately try to run it.
Often the instructions describe the installation process and the first start of the washing machine. Be sure to read the manual completely, taking into account all the footnotes - the most important points may be mentioned in them.
If you want your washing machine to consume less power, follow our tips:
- It is forbidden to overload the machine more than allowed in the instructions.
- Do not wash items that are not machine washable.
- Make sure that the machine does not have various metal products - they can ruin your clothes and drum.
Readiness Check
So that the first use of the washing machine does not become troublesome, we recommend that you not only read, but also perform the following steps:
- On the back of the machine are transport bolts designed to fix the washing machine tank during transportation. If the bolts are not twisted, then you cannot use the machine. First, you need to unscrew the fasteners, and insert the plastic plugs (supplied with the machine) into the remaining holes.
- Knowing the hardness of your tap water will be very helpful. So you can clearly understand how to use washing powder for the first start and in what quantity so that the laundry does not remain dirty after washing.
- Equipment must be connected to the water supply and sewage system. If you do not want to call a specialist, do it yourself.
- Check the inlet hose valve. If it is blocked, open it so that water begins to flow into the machine.
If you have a question, is it possible to turn on the washing machine without laundry, we will answer - it is possible. The opinion of specialists boils down to the fact that the first wash in the washing machine should be “idle”.
Often, cars undergo various tests, so there may be residual dirt and oil in the drum. So that they do not get on your things, you must first start an empty machine - this will allow you to clean all the internal parts.
At the first wash, it is recommended to pour a small amount of detergent into the powder receiver, select a mode with a long cycle and start it.
The effectiveness and progressiveness of the first launch depends on how correctly the steps described above are completed. If you miss an important part, you will not only not be able to launch the AGR, but you will also harm it.
Optimum Mode Selection
After you have checked the correct connection of the machine, drove the drum idle, it is time to go to the next step - select a washing program.
Modern models of cars differ not only in the number of programs, but also in purpose. Of the more popular features of the machines is a quick wash program and additional functions, for example, a mode for disinfection.
When choosing a washing mode, take into account temperature indicators that affect the quality of the wash. An improperly selected temperature can ruin a thing. What functions and modes your washing machine provides, you will find in the instructions.
Each model has different controls. For example, more budget cars are equipped with an adjustment wheel to select a mode. Expensive models allow you to set the mode by controlling the touch panel.
After the preparation for work is completed, you will need to figure out how to start the washer. There should be a “Start” button on the control panel - after clicking on it the machine will start washing.
First wash: important points
Experimental washing is an opportunity to check the machine for leaks. So you can finally make sure that the equipment is correctly connected to the water supply and sewage.
If a leak is detected, you must immediately stop the machine. Forcibly drain the water, then be sure to contact a specialist for help. Only after fixing all the problems can the machine be used again.
If everything is in order, and the test wash went well, you can start washing the laundry. Do not forget to use the instructions and follow all the recommendations indicated in it. You will find information on the maximum load of linen, and how much washing-up liquid to pour into the tray.
In order not to harm things and the machine, you need to know all the important nuances, and set the correct parameters.
After loading the laundry and choosing the washing mode, make sure that the door is tightly closed. Now start the washer by clicking the "Start" button.
Important! Make sure that the machine is not leaking. If this is not done, the equipment will fail and will be unusable.
Useful tips for starting a washing machine
We offer you some useful recommendations that will help you understand the operation of the washing machine after its purchase:
- Starting the machine for the first time and noticing that it is rattling, rattling and making strange sounds, do nothing yourself. You are entitled to a free repair of equipment in the service center for a warranty card. In this situation, call the service and explain the problem. A craftsman will come to you and repair the equipment or take it to repair.
- Wipe the casing of the washing machine regularly. Use products that do not contain chlorine.
- Do not forget to remove moisture and dirt after washing under the rubber seal.
- Use special detergents for machine washing. Do not use handwash powders. This threatens not only with the fact that the dirt can not be removed, but with the breakdown of the machine.
- Do not overload the machine with linen, as this will quickly wear out parts due to imbalance in the drum.
- As often as possible, try to clean the drain filter from various small blockages.
- Before loading items into the drum, be sure to check your pockets for foreign objects.
- After washing, do not close the door - the machine should be ventilated. If ventilation is not done, this will lead to the formation of mold, fungal infections and the appearance of an unpleasant pungent odor.
- Perform prophylaxis. To remove scale from the heating element, it is recommended to use special products, citric acid, soda or vinegar.
These simple rules will help you cope with any difficulties. Proper operation and regular maintenance of the SM is a guarantee of stable, serviceable and high-quality work. Things will be clean and fresh, and the machine will last a long time.